WindStar MPPT charger rated at 12/ 24/ 36/ 48V- 100A
The WindStar MPPT is a highly reliable wind battery charger and its most critical feature is to maximize the harvest energy from the 3-Phase wind turbine into the battery by using the advanced technology of Maximum Power Point Tracking (MPPT).
Integrates Wind Interface (Included the rectifier and braking unit), Maximum Power Point.
Tracking (MPPT), battery charge management, state of charge information.
Continuous output Power Rating without de-rating at up to 50℃ ambient temperature.
Built-in Battery Energy Monitor tracks power production and consumption to calculate the energy remaining in battery state of charge (SOC) is displayed in percent full, Amp-hours, Watt-hours, and 90 days of energy-harvest history is stored in the wind MPPT charger.
Supports Flooded Lead Acid (FLA), GEL, Absorbed Glass Mat (AGM) batteries; 2/ 3/ 4-stage charging with adjustable set points for all parameters.
Up to 220 VAC input voltage from Wind Turbine.
Easy stacking of up to 16 units in parallel for high currents.
Precision charging of 12V/ 24V/36V/48V batteries with easy set-up and using battery voltage sense (BVS) wires.
Built-in temperature compensation function for safe and complete charging.
The Wind MPPT Charger with the rectifier and braking unit for wind system is required to control and stop the control from overload condition caused by over large wind speed.
Wind MPPT Chargers is 240 VDC. Supply 5 levels of the Automatic Brake Function: 200, 210, 220, 230, 240 VDC (Adjustable)
When WS-100CX Wind MPPT Charger connects with 48 VDC batteries, it can support 6.0KW Wind Turbine.