MPPT Solar Charger rated at 12/24/36/48V-40, 50, 80 Amp
MPPT Solar Charger has another model with integration of the Maximum Power Point Tracking technology for the optimal solar power production. The higher efficiency of MPPT Solar Charger is achieved regardless of the sunlight condition. MPPT solar Charger can be integrated the external braking unit to be applied in the wind solar charging system.
Integrates Maximum Power Point Tracking (MPPT), battery charge management, state of charge information.
Continuous output Power Rating without de-rating at up to 50℃ ambient temperature.
Built-in Battery Energy Monitor tracks power production and consumption to calculate the energy remaining in battery state of charge (SOC) is displayed in percent full, Amp-hours, Watt-hours, and 90 days of energy-harvest history is stored in the solar charger.
Supports Flooded Lead Acid (FLA), GEL, Absorbed Glass Mat (AGM) batteries; 2/3/4-stage charging with adjustable set points for all parameters.
Wire the PV modules in series up to 112VDC normal (140VDC Max) for SS-50C Series, SS-80C Series and 192VDC normal (240VDC Max) for SS-80CX Series, SS-160CX Series.
Easy stacking of up to 16 units in parallel for high currents.
Precision charging of 12V/ 24V/36V/48V batteries with easy set-up and using battery voltage sense (BVS) wires.
Built-in temperature compensation function for safe and complete charging.
The optional rectifier with braking unit for wind system is required to control and stop the controller from overload condition caused by over large wind speed.